Patio Black Spot Remover is currently the only product developed specifically to remove those hideous black spots and restore the natural stonework.
Patio Black Spot Remover for Natural stone will not only remove black spots but completely restores the original colour, whilst also removing all other forms of organic growth. For use on Indian Sandstone, York Stone, Limestone (including Bath and Portland Stone), Purbeck Stone and all other Natural Stone.
To maintain your garden stonework and stop the return of the black spots, buy and apply our Patio Black Spot Preventer annually. This will remove any black spot spores before they have the chance to germinate and turn into spots. It will also remove green algae without the need to power wash!
How to use
Prior to use, pressure wash the area to remove any surface dirt and loose debris. It is important the Patio Black Spot Remover comes into direct contact with the surface of the stone and the black Spots. Any surface dirt will reduce the effect of this product.
DO NOT APPLY IN DIRECT SUNLIGHT OR WHEN RAIN IS IMMINENT
A dry overcast day when rain is not forecast is ideal. The product works when wet, if it dries too quickly the performance will be reduced.
Supplied in liquid form, ready for use.
Pour straight into a 5L or 7L Hozelock garden pneumatic sprayer.
Coverage – not exceeding 5 SQM per 1L.
Dwell time: leave for 2 hours. No need to scrub.
Remove using a pressure washer with a fan jet (Vario).
Removes all forms of organic growth including, green and red algae, white fungi, black spots (lichen) and moss.
Available in 2 and 4 litre containers.
1. Use neat – DO NOT DILUTE – Pour our solution into a pneumatic garden sprayer. (A ‘Hozelock’ 5L or 7L sprayer is recommend. Do not use a hand sprayer.) Pressurise the sprayer.
2. Apply the product to a dry surface, as a fine mist and saturate the surface.
3. If you have not used the product before. Treat just one slab first. The older the stone, the more treatments it will require. The product will remove every single last spot. By completing one slab first, this will give you an indication of how many treatments your stone will require. Only when you have removed all the black spots from the first slab, continue with the rest of the area.
4. DO NOT EXCEED THE MAXIMUM RECOMMENDED COVERAGE OF 5 SQM PER EACH 1L OF PRODUCT.
5. Once applied, allow to cure for a period of 2 hours.
6. Remove using a pressure washer, ideally with a minimum flow of 7 litres per minute. Use the fan jet attachment to sweep the dirt away. Other attachments such as circular spinning attachments will not give you the best results.
7. Any black spots that remain, simply retreat (when the surface is dry) allow to cure for 1 hour then wash off.
8. Repeat this process until no black spots remain.
9. Apply the Patio Black Spot Preventer 12 months later. Do not seal the patio.
Exceeding the recommended coverage rate will reduce the performance of this product. Coverage will vary depending on surface porosity and profile, e.g when treating sloping areas or riven surface, beware of surface run off and retreat as necessary to ensure correct coverage.
The Patio Black Spot Remover is quickly and readily biodegradable. The effluent if washed into soil, flower beds or lawn will breakdown rapidly. This product will not affect surrounding lawns or foliage in diluted state. Keep animals and unprotected persons off the treated area until dry.
Ensure product doesn’t come into contact with skin, eyes or respiratory tract. In the event product does comes into direct contact with the body, immediately rinse with water. Ensure this product does not come into contact with fabrics or furnishings.